Non-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Locksmith in Marietta, GA
Lock installation and rekeying in Marietta runs $85-$195 per cylinder for standard residential hardware, with most jobs completed same-day. We quote that price in writing before we dispatch, and it’s the price on the invoice. Marietta’s mix of pre-1900 mortise hardware near the Square, 1960s ranch homes without deadbolts, and East Cobb smart-lock retrofits means every job requires a different skill set and inventory. Call (762) 252-5919 for a written estimate.
Why Marietta Homes Are Different
Marietta compresses a century of lock hardware into one service area. The antebellum and late-Victorian buildings clustered around Marietta Square still run original mortise locksets and skeleton-key systems that require specialty knowledge almost extinct in neighboring suburbs. We’ve fabricated mortise case parts for Square restaurants whose lock manufacturers ceased production before World War II.
The ranch-era belt through older city neighborhoods presents the opposite problem: entry doors bored only for knob locks, never retrofitted with deadbolts. We install ANSI Grade 1 deadbolts on original wood frames weekly. East Cobb’s master-planned communities generate demand for smart-lock integration on higher-end but varied ecosystems.
Climate drives seasonal patterns. July humidity swells door frames and binds deadbolt throws; customers call saying “the lock won’t turn” when the cylinder is fine and the frame has shifted. Hard freezes seize cylinders on back and garage doors that see little use. We carry frame-alignment tools and cylinder lubricants suited to both conditions.
Our Main Marietta Services
Three services account for most calls in Marietta, each with dedicated local crews and inventory.
Commercial Locksmith in Marietta
Square businesses with vintage mortise hardware, strip centers with master-key systems, and office parks with access-control retrofits all fall under this service. We stock skeleton-key blanks and mortise replacement parts that most Atlanta locksmiths don’t carry. Commercial Locksmith in Marietta covers master-key design, panic hardware, and scheduled rekeying for tenant turnover.
Residential Locksmith in Marietta
Ranch-era deadbolt retrofits, smart-lock upgrades in East Cobb, and lockout response for the full housing spectrum. We pre-bore original wood frames for deadbolt installation and integrate Yale, Schlage, and Baldwin smart ecosystems with existing WiFi networks. Residential Locksmith in Marietta handles everything from knob replacement to full-perimeter rekeying after closing.
Access Control Systems in Marietta
Commercial and residential electronic entry systems, from standalone keypad locks to networked card-reader installations. We survey the site, deliver a written scope, and quote flat per-door pricing before ordering hardware. Access Control Systems in Marietta covers new construction and retrofits for property managers and homeowners’ associations.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Lock Installation & Rekey in Marietta
Most Marietta lock installation and rekey calls fall into two categories: upgrading security on older hardware that was never designed for it, or integrating new electronic systems into homes with mixed-vintage doors. The 1960s ranch stock often needs deadbolt installation on frames that were never pre-bored; East Cobb homes need smart locks that communicate with existing automation hubs. Lock Installation & Rekey covers the full range, always with a written price before we start.
Smart Lock Installation
Signs you need it
You’re still carrying mechanical keys for a home with Nest, Ring, or Alexa devices already installed, or your current smart lock loses connection weekly and requires battery pulls to reset.
What it costs in Marietta
Smart lock installation typically runs $180-$350 per door, including rekeying to match existing mechanical keys if the smart lock has a backup cylinder.
How we do it
We verify door thickness, backset, and bore diameter against the smart lock’s requirements; install the escutcheon and deadbolt; pair the lock to your hub or app; test all entry methods; and document the installation with a photo record left with you.
Deadbolt Installation on Original Frames
Signs you need it
Your front door has only a knob lock, no deadbolt, or the existing deadbolt is a Grade 3 builder’s special with a strike plate held by half-inch screws.
What it costs in Marietta
Deadbolt installation on an unprepped wood frame typically runs $125-$225, including ANSI Grade 1 hardware and a reinforced strike box.
How we do it
We mark and bore the deadbolt hole and face bore, chisel the strike mortise, install the Grade 1 deadbolt and reinforced strike, align the throw with the frame, and test operation across seasonal temperature swings.
What Lock Installation & Rekey Costs in Marietta
| Item | Typical range in Marietta |
|---|---|
| Standard rekey (per cylinder) | $85-$125 |
| Deadbolt installation (original frame) | $125-$225 |
| Smart lock installation | $180-$350 |
How long does a rekey take?
Most residential rekeys take 20-40 minutes per cylinder. A full-home rekey with four cylinders is typically done in under two hours, with one key operating all locks. Call (762) 252-5919 for an exact quote; estimates are free.
Can you rekey Kwikset and Schlage to the same key?
No, they use different keyways. We can convert one brand to match the other by replacing the cylinder, or install a single-brand system across all doors. We’ll inspect what you have and quote both options in writing.
Emergency Locksmith in Marietta
Emergency lockout calls in Marietta spike during two conditions: summer humidity swells frames and jams deadbolts that worked fine in spring, and winter ice seizes cylinders on seldom-used doors. The Square’s vintage mortise locks add a third category, skeleton-key mechanisms that slip or break with age. Emergency Locksmith response is available 24/7 with a live dispatcher, not an automated queue.
House Lockout
Signs you need it
Your key turns but the bolt won’t retract, or the key won’t enter the cylinder at all, or you’ve confirmed the keys are inside and no other entry is available.
What it costs in Marietta
House lockout service typically runs $95-$175 during standard hours and $145-$225 after hours, with the full price quoted before we dispatch.
How we do it
We verify ownership or residency, assess the lock type and condition, pick or bypass without drilling when possible, and if drilling is required we replace the cylinder at our cost under the 365-Day Done Right Promise.
Broken Key Extraction
Signs you need it
Half your key is visible in the lock or the key snapped off flush with the cylinder face and the lock won’t turn with the remaining piece.
What it costs in Marietta
Broken key extraction typically runs $85-$150, including cutting a replacement key from the extracted pieces if they’re intact enough to read.
How we do it
We use extractor tools or fine probes to remove the broken piece without pushing it deeper, inspect the cylinder for damage caused by the break, cut a replacement key, and test operation before leaving.
What Emergency Locksmith Costs in Marietta
| Item | Typical range in Marietta |
|---|---|
| House lockout (standard hours) | $95-$175 |
| House lockout (after hours) | $145-$225 |
| Broken key extraction | $85-$150 |
Do you charge extra for emergency calls at night?
After-hours rates apply from 8 PM to 7 AM and on major holidays. The dispatcher quotes the full after-hours price on the phone; the technician cannot change it at the door. Call (762) 252-5919 for the current rate.
Can you open a lock without damaging it?
We pick or bypass first on every call. Drilling is a last resort, used only when the lock has failed internally or anti-pick features prevent entry. If we drill, we replace the cylinder at our cost.
Brands We Service in Marietta
We stock and service Kwikset, Medeco, Yale, and Baldwin across our Marietta inventory, with factory-authorized work on high-security Medeco cylinders. Most standard hardware is on the van; specialty orders arrive within two business days. our brands
Pricing for Locksmith in Marietta, GA
| Service | Typical range in Marietta |
|---|---|
| Standard rekey (per cylinder) | $85-$125 |
| Deadbolt installation (original frame) | $125-$225 |
| Smart lock installation | $180-$350 |
| House lockout (standard hours) | $95-$175 |
| House lockout (after hours) | $145-$225 |
| Broken key extraction | $85-$150 |
| High-security cylinder rekey (Medeco/Mul-T-Lock) | $145-$250 |
| Master-key system (per cylinder, commercial) | $95-$175 |
Prices increase for mortise lock work on Square vintage hardware due to part fabrication time, and for frame repairs when humidity swelling has shifted the strike alignment. Haven Standard Clause 1 applies to every job: the price quoted on the phone is the price on the invoice, with no call-out surcharge added on arrival.
Neighborhoods We Serve in Marietta
We dispatch to all Marietta ZIP codes from our Atlanta coordination office, with typical response times of 25-40 minutes for emergency calls across the city.
- Marietta Square (historic district, mortise lock specialty)
- East Cobb (smart-lock upgrades, master-planned communities)
- Whitlock Heights (ranch-era deadbolt retrofits)
- Kennesaw Avenue corridor (mixed vintage, 1920s-1960s)
- Indian Hills (upscale residential, high-security installations)
Service Area - Cities Near Marietta
Novak Lock & Security serves the full northwest metro corridor. Crews are regularly dispatched to Kennesaw, GA for commercial master-key systems, Atlanta, GA for downtown access-control retrofits, Acworth, GA for lake-area residential installations, and Roswell, GA for historic-home mortise work. All jobs follow The Haven Standard and carry the 365-Day Done Right Promise.
Serving Marietta, GA - Our Local Coverage Area
We’re based in the Marietta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Locksmith in Marietta
Residential lock changes and rekeys do not require permits in Marietta. Commercial properties with panic hardware or fire-rated doors may need inspection alignment; we document our work to code specifications and provide the paperwork for your fire marshal if required.
Yes. We work with several East Cobb homeowners’ associations on gate access control, pool-entry systems, and clubhouse master-key schedules. We deliver a written scope and flat per-lock pricing before scheduling, not per-hour estimates.
Emergency calls to the Square average 30-45 minutes during peak traffic on Canton Road and Roswell Street. The dispatcher gives a real-time ETA when you call; if we’re delayed, we call back with an updated window.
Call (762) 252-5919 for a free, written estimate on any lock installation, rekey, or emergency service in Marietta. The price we quote is the price you pay.
What happens when you call
- 1A real person answersNo phone trees - talk to a local locksmith pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Marietta Customers Say
"Fitted proper hardware on the back door and did not try to sell me a smart lock I did not want."
- Imogen P."Locked out at eleven at night. A person answered, gave me a time and a name, and both were right."
- Franklin D."Fast, polite, and carried identification without being asked. Would use again."
- Grant W.